.
.

THIS SITE IS DELETED

.
.

Kode Rahasia Ponsel

Berikut adalah Kode Rahasia Ponsel.
Ada beberapa tipe yang pernah saya coba dan tidak berhasil. Jadi kode-kode ini tidak mutlak untuk semua HP Kode Rahasia Ponsel (Handphone)
http://www.gsn-soeki.com/wouw/

Untuk mengetahui kode akses (informasi) tersembunyi,
tekanlah kode akses di bawah ini dan diikuti tekan
"CALL" (biasanya bergambar gagang telepon hijau)

KODE AKSES NOKIA
*#30# Menampilkan 'private number' yg menghubungi Anda
*#73# Mereset timer ponsel dan skor game (pd bbrp ponsel)
*#7780# Mengembalikan ke setting pabrik (factory setting)
*#2820# Alamat IP perangkat Bluetooth (hanya utk yg memiliki fitur Bluetooth)
xx# Akses cepat ke nama/nomor telepon di phonebook ponsel misal 20#
Tombol OFF Menekan dg singkat, utk berpindah antar profile
*3370# Mengaktifkan ENHANCED FULL RATE Codec (EFR). Ponsel Nokia Anda akan
memakai kualitas suara terbaik, namun fitur ini memerlukan energi lebih shg
sedikit menguras daya baterai. Catatan: kode ini tidak berlaku di ponsel2
Symbian.
#3370# Menonaktifkan Enhanced Full Rate Codec (EFR)
*#4720# Mengaktifkan Hall Rate Codec. Ponsel Nokia Anda akan menggunakan
kualitas suara lebih rendah shg bisa menghemat energi baterai sekitar 30%
#4720# Menonaktifkan Half Rate Codec
*#0000# Menampilkan versi software ponsel. Baris pertama menunjukkan versi
software, baris kedua menunjukkan tgl pembuatan software, baris ketiga
menunjukkan tipe kompresi yg digunakan.
*#9999# Kode alternatif jika *#0000# tidak bekerja
*#06# Melihat nomor international Mobile Equipment Identity (nomor IMEI)
*#21# Mengecek nomor panggilan "All Calls" yg digunakan
*#2640# Menampilkan kode keamanan ponsel yg digunakan (bila masih
menggunakan standard kode tidak akan terlihat)
*#43# Mengecek status "Call Waiting"
*#61# Untuk mengecek nomor pemanggil yg dialihkan ketika tak Anda jawab
(Jika Anda mengaktifkan Call Divert/pengalihan panggilan)
*#62# Mengecek nomor pemanggil yg dialihkan ketika ponsel Anda di luar
jangkauan (jika Anda mengaktifkan Call Divert/pengalihan panggilan)
*#67# Mengecek nomor pemanggil yg dialihkan ketika ponsel Anda sedang sibuk
(Jika Anda mengaktifkan call Divert/pengalihan panggilan)
**21*number# Menghidupkan pengalihan "All Calls" pada nomor yg diisi
**61*number# Menghidupkan pengalihan "No Reply" pada nomor yg diisi
**67*number# Menghidupkan pengalihan "On Busy" pada nomor yg diisi
*#67705646# Mengganti Logo Operator Logo pada Nokia 3310 dan 3330
*#746025625# Menampilkan status SIM Clock. Jika ponsel Anda mendukung fitur
penghemat energi akan keluar tulisan "Sim Clock Stop Allowed", artinya Anda
akan mendapatkan waktu standby yg lebih panjang.
*#7760# Menampilkan kode pabrikan (utk sebagian besar ponsel tipe lama)
*#92702689# Memunculkan: 1.Serial Number (nomor serial), 2.Date Made (tgl
pembuatan), 3.Purchase Date (tgl pembelian), 4. Date of last repair (tgl
terakhir perbaikan / 0000 utk yg belum pernah diperbaiki). 5. Transfer User
Data. Di bbrp ponsel, untuk keluar dari mode ini Anda harus merestart ponsel.


---:---
Photo Organizer dari Google: http://www.top31.net
Koleksi Artikel Pilihan Webmaster: http://www.top31.net
Koleksi Semua Artikel: http://www.gsn-soeki.com/wouw/



..
Send instant messages to your online friends http://asia.messenger.yahoo.com

*#30# : Menampilkan ‘private number’ yang menghubungi anda.
*#73# : Mereset timer ponsel dan skor game (pada beberapa ponsel).
*#7780# : Mengembalikan ke setting pabrik (factory setting).
*#2820# : Alamat IP perangkat Bluetooth (untuk ponsel yang mempunyai Bluetooth).
xx# : Akses cepat ke nama/nomer telepon di phone book ponsel, misalnya 20#.
Tombol off : Menekan dengan singkat, untuk berpindah antar profile.
*3370# : Mengaktifkan EFR(Enhanced Full Rate) Codec (tidak berlaku di ponsel Symbian).
#3370# : Menonaktifkan EFR Codec.
*#4270# : Mengaktifkan Half Rate Codec.
*#4270# : Menonaktifkan Half Rate Codec.
*#0000# : Menampilkan versi software ponsel.
*#9999# : Kode alternatif jika *#0000# tidak bekerja.
*#06# : Melihat nomor IMEI (Internasional Mobile Equipment Identity).
*#21# : Mengecek nomor pengalihan “All Call” yang digunakan.
*#2640# : Menampilkan kode keamanan ponsel yang digunakan.
*#43# : Mengecek status “Call Waiting”.
*#61# : Untuk mengecek nomor pemanggil yang dialihkan ketika tak anda jawab.
*#62# : Mengecek nomor pemanggil yang dialihkan ketika ponsel anda di luar jangkauan.
*#67# : Mengecek nomor pemanggil yang dialihkan ketika ponsel anda sedang sibuk.
**21*number# : Menghidupkan pengalihan “All Call” pada nomor yang diisi.
**61*number# : Menghidupkan pengalihan “No Reply” pada nomor yang diisi.
**67*number# : Menghidupkan pengalihan “On Bussy” pada nomor yang diisi.
*#67705646# : Mengganti logo operator logo pada Nokia 3310 dan 3330.
*#746025625# : Menampilkan status SIM Clock.
*#7760# : Menampilkan kode pabrikan (sebagian besar ponsel tipe lama).
*#92702689# : Memunculkan : 1. Serial Number, 2. Date Made, 3. Purchase Date, 4. Date of last repair, 5.Transfer user data. Keluar dari mode ini harus merestart ponsel ( pada beberapa ponsel ).

*#06# : Melihat nomor IMEI (Internasional Mobile Equipment Identity).
*#0000# : Mereset bahasa kembali ke English.
> * < < * < * : Service Menu - menampilkan versi software ponsel. Tekan “Yes” berulang-ulang untuk melihat semua data software dan tekan “>” untuk melihat semua teks yang terdapat pada ponsel.
< * * < : Mengunci SIM Card.

Sortcuts :
1.Menyimpan nomor “Missed Call” di direktori ponsel.Cari menu “Missed Call”, tekan “Yes” untuk menampilkan nomor yang dituju. Tekan nomor apa saja ( 0 sampai 9 ), kemudian tekan “clear” sekali untuk memblok nomor tersebut, kemudian tekan dan tahan “<” sampai muncul “Store”, tekan “Yes”.
2.Menyembunyikan nomor. Setelah menekan nomor yang dituju dan sebelum menekan “Yes”, tekan ‘ > ‘ 2 kali untuk memilih “Hide Id?” dan tekan ‘Yes’.
3.Mengecek level batere ketika ponsel mati (off ).Tekan ‘No’ secara cepat 1 x dan tunggu hingga tampilan baterai terlihat. Menyimpan nomor di memori ponsel (bukan SIM Card).Ikuti prosedur normal untuk menyimpan nomor. Ketika tampilan untuk menyimpan terlihat tekan ‘#’ sekali dan lokasi yang diinginkan, atau tekan ‘#’ 2 kali untuk melihat posisi lanjutan.
4.Menghubungi nomor dari pesan SMS.Mengarahkan kursor pada nomor yang tertulis, kemudian tekan “Yes”.
5.Shortcut Penampilan Gambar :
(Berlaku di sebagian besar ponsel Symbian).
Ketika melihat image atau gambar di galeri, tekan :
1 : untuk memutar gambar ke kiri.
2 : untuk memutar gambar ke kanan.
5 atau 7 : untuk memperbesar (zoom) gambar.
* : untuk tampilan fullscreen atau non fullscreen.
nich bos da tambahan dikit moga-moga aja berguna:
KODE RAHASIA UNTUK GSM DAN CDMA
AnyDATA


AnyDATA AMC 450 Code for NAM Programming Mode:
Nam Set:[*][7][4][2][6][9][#][*][7][4][8][#][9][6][1][4][8][0][6][3][SEL]



Audiovox

Audiovox 4000, 9000, 9100, 9155, 9500 Code for NAM Programming Mode:
Nam Set: [2][8][9][fcn][#][1]
Debug menu : [fcn][0][0][fsc]
Test Mode: Hold [2][*][Rcl][Power]

Audiovox 107 Nam Programming:
Nam Set: [4][5][6][8][0][*][4][7][*][8][6][9][#][1]

Audiovox 9950 Nam Programming:
Nam Set: [#][#][3][2][8][2]



Curitel

Curitel 100, 510, 520 Code for NAM Programming Mode:
NAM Set: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
Field Teste :[#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]
Enter A-KEY: [2][5][3][9][*][*]
Debug Menu: [#][#][2][7][7][3][2][7][2][6][PWR]
SAR Test: [#][#][2][7][7][5][2][3][4][5][PWR]
Baud rate: [#][#][3][6][*][*][PWR]
DM mode Enable:[*][*][1][0][0][4][PWR]
DS mode Enable:[*][*][1][0][0][5][PWR]
Test Bell/Led/Voice/Dot:[#][#][1][1][2][2][PWR]
RF mode: [#][#][2][2][4][0][PWR]
RAS RAM: [#][#][2][7][7][4][PWR]
CMUX 1:[*][*][0][4][8][1][PWR]
CMUX 2:[*][*][0][4][8][2][PWR]
RX mode FAX:[*][*][0][4][9][2][PWR]
RX mode DATA:[*][*][0][4][9][1][PWR]
RX mode RESET:[*][*][0][4][9][0][PWR]

Curitel 525, 550 Code for NAM Programming Mode:
Debug Menu [##*193*762534#*][PWR]
SCI DTMF TYPE [##13*92*#62*][PWR]
TEST BELL VIB LCD VOICE [##22635*262*][PWR]
CMUX 1[***12*#811#][PWR]
CMUX 2 [***37*#922*][PWR]
RX MODE RESET [***64*#133#][PWR]
RX MODE DATA[***83*#247*][PWR]
DS MODE ON [***12045#*#][PWR]
RF NV INIT [##0*#*63861829372#][PWR]
RAS_RAM [##3*13091#1279#*][PWR]



Ericsson

Ericsson A1228C, T61 Code for NAM Programming Mode:
Nam Set: Shot : [9][8][7][ MENU ]
Nam Set: Long: [9][2][3][8][8][5][ MENU ][ SPC CODE ]
CDMA mode : [9][0][4][0][9][3][ MENU ]
Analog mode : [9][0][4][0][9][5][ MENU ]
DM mode : [9][0][4][0][5][0][ MENU ]



Gtran

Gtran 2000 Code for NAM Programming Mode :
Nam Set:[0][1][#][7][3][7][ SPC CODE ]
Debug menu: [0][1][#][3][2][4][ SPC CODE ]
Debug Screen : [0][1][#][7][2][7]
Test mode: [0][1][#][7][6][4][ SPC CODE ]
System test mode: [0][1][#][7][6][8][ SPC CODE ]

Gtran GCP 5000 Code for NAM Programming Mode :
Debug Screen : [0][1][#][7][2][7]
Test mode: [0][1][#][7][6][5]



Giga Telecom

GIGA Z 510 Code for NAM Programming Mode :
Nam Set: [ MENU ][0][ SPC CODE ]

GIGA Z 710i (GCD-456) Code for NAM Programming Mode :
Nam Set: [ MENU ][0][ SPC CODE ]


Huawei

Huawei ETS 668, 678, 688 Code for Debug mode

Test mode [##2][MENU][ Field service code ]
RF call [##5][Menu]
Debug screen [##44][Menu]
Debug screen [##33][Menu]
NV reset [##123][Menu]
CDG2 Test enable [##234][Menu]
CDG2 Test disable [##432][Menu]
Home only off [##460][Menu]
Home only on [##461][Menu]
Setup language china (ChinaTelecom) [##551][Menu]
Setup language eng/rus (SkyLink) [##552][ Menu]
Setup language eng/rus (Dialog) [##553][ Menu]
Initializing Phone [##777][Menu]
Enable to UIM and UIMless sw version [##846][Menu]
Setup factory mode only possible UIM sw version [##864][Menu]
Block debug code / Free debug code [##888][Menu]
Enable UTK Mode [##885][Menu]
Enable security mode [##456258##][menu][Service code ]
Use any card [*117049976#]



Hyundai

Hyundai HWP-110 NAM Programming:
Nam Set: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]
DM Mode: [#][#][2][7][4][0][*]

Hyundai HGC 120e, 130e Code for NAM Programming Mode:
Nam Set: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]

Hyundai HGC 310, 600, 610 Code for NAM Programming Mode
Nam Set: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
Field Teste :[#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]



Kyocera

KYOCERA 2035, 2135, 2255, 2345, 5135, 6035, SE47 NAM Programming Mode:
Nam Set: 111111 [OK], Select "Programming"+Spc
CAI Change: [#][#][7][7][3][8][ok]
Enable TTY: [#][#][8][8][9][ok]
Life Timer, PRL, etc: [#][#][7][8][6][ok]
A-key: [#][#][2][5][3][9][ok]
A-key: [2][5][3][9][ok]



LG Electronics

LG LGC 300 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][ SPC CODE ]
A-Key: PUSH [ STO ] 3 SEC. [2][5][3][9][*][*]

LG LGC 330W Code for NAM Programming Mode:
Nam Set: [ MENU ][4][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 800W, 500 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][0][ SPC CODE ]
Debug Mode : [ MENU ][7][0][ FSC CODE ]
Debug Mode : [ MENU ][8][0][ FSC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 510 Code for NAM Programming Mode:
Nam Set: [ MENU ][3][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]



Motorola

Motorola 7760, 7860, 2260, 8160 Code for NAM Programming Mode:
Nam Set: [ FCN ][0] [0][0][0][0][0][0][0][0][0][0][0][0][ RCL ]
Test Mode : [ FCN ][0][0][*][*][8][3][7][8][6][6][3][3][ STO ]

Motorola V60c, V120 Code for NAM Programming Mode:
Nam Set: [7][4][6][6][3][#][Menu][Menu][ SPC CODE ]
Test Mode : [Menu][0][7][3][8][8][7][*][ SPC CODE ]

Motorola v710, v730, v740 Code for NAM Programming Mode:
Nam Set: [8][3][7][8][*][#] press 3 times NATE [0][7][1][0][8][2]
Test Mode: [Menu][0][7][3][8][8][7][*][0][7][1][0][8][2]
Service Menu: [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]

Motorola v720 Code for NAM Programming Mode:
Nam Set: [0][7][3][8][8][7][*]
Test mode: [8][3][7][8][*][#] [Pres Tape Butone 3 Time]

Motorola V6060 Code for NAM Programming Mode:
Nam Set: [1][4][7][*][3][6][9][#][4][5][6][*][0][#]

Motorola MC150 Code for NAM Programming Mode:
Nam Set: [0][1][7][0][8][2]
Test mode: [8][3][7][8][*][#][Pres Slide Buton 3 Time]

Motorola MC200, MC230, MC250, MC280, MC300, MC500 NAM Programming:
Nam Set: [5][7][5][9][7][8][9][*][#][Cam Buton 3 Time][9[1][5][0][3][7]


Nokia

Nokia 5185, 2112, 3285, 6225, 6585, 8280 Code for NAM Programming Mode:
Nam Set:[*][3][0][0][1][#][1][2][3][4][5][#]
Software version:[*][#][8][3][7][#]
Software version:[*][#][9][9][9][9][#]
Serial / ESN:[*][#][9][2][7][7][2][6][8][9][#]
Phone restart:[*][#][7][5][6][8][1][#]
Phone restart:[*][#][7][5][6][8][2][#]

Nokia 8587 Code for NAM Programming Mode:
Nam Set:[*][#][6][2][6][#][7][7][6][4][7][2][6][#]
Version :[*][#][0][0][0][0][#]
Vocoder :[*][#][3][8][7][2][#]
Debug Screen :[*][#][8][3][7][8][#]
Debug:[*][#][8][3][8][0][#]
Field test menu :[*][#][8][3][7][8][8][#]

Nokia 8887 Code for NAM Programming Mode:
Nam Set:[*][3][0][0][1][#][1][2][3][4][5][#]
Version :[*][#][0][0][0][0][#]
EVRC :[*][#][8][3][7][8][#]
SERIAL :[*][#][9][2][7][7][2][6][8][9][#]


Pantech

Pantech HX550C Code for NAM Programming Mode:
Debug Menu [##*193*762534#*][PWR]
SCI DTMF TYPE [##13*92*#62*][PWR]
TEST BELL VIB LCD VOICE [##22635*262*][PWR]
CMUX 1[***12*#811#][PWR]
CMUX 2 [***37*#922*][PWR]
RX MODE RESET [***64*#133#][PWR]
RX MODE DATA[***83*#247*][PWR]
DS MODE ON [***12045#*#][PWR]
RF NV INIT [##0*#*63861829372#][PWR]
RAS_RAM [##3*13091#1279#*][PWR]

Qualcomm

QUALCOMM QCP 800 Code for NAM Programming Mode:
Nam Set: [ MENU ][3][0][ SPC CODE ]
Field test : [ MENU ][7][0][ FSC CODE ]

QUALCOMM QCP 820 Code for NAM Programming Mode:
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

QUALCOMM QCP 860 Code for NAM Programming Mode:
Nam Set: [ MENU ][8][0][ SPC CODE ]
Field test : [ MENU ][5][0][ FSC CODE ]



Samsung

Samsung e170, e250, e300, X-series, etc Nam Programming:
Nam Set: [6][5][4][8][#][0][*][*][4][#][6]
Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
Debug Menu: Menu(2sec) [0][6][7][2][5] or
Debug Menu: Menu(2sec)[9][7][2][0]


Samsung sph-n240, n400, a460, a500, Code for NAM Programming Mode:
Nam Set: [#][#][Spc]
Test Mode: [4][7][*][8][6][9][#][1][2][3][5]
Debug Menu: [#][#][3][3][2][8][4][ok]
Service Menu: [Menu][8][0][#][8][8][9]
Reset , Clear Memory: [#][#][7][8][6][ok]
A-key: [#][#][2][5][3][9][ok]
Label Selection: [#][#][3][8][8][2][ok]
Label(Home, Work, etc) :[*][*][5][2][3][ok]
NGG Setting (Gateway, etc.): [#][#][2][7][6][9][7][3][7][ok]
Vocoder: [#][#][8][6][2][6][3][3][7][ok]
CAI Change: [#][#][7][7][3][8][ok]
Enable TTY:[#][#][8][8][9][ok]

Samsung SCH A300 Code for NAM Programming Mode:
Nam Set: [ MENU ]
Test Mode: [4][7][*][6][8][#][1][3][5][8][0]

Samsung SCH 470, 570, 670, 611, 811, N101, A100, A105, A300, ?2000
Nam Set: [4][7][*][8][6][9][#][0][8][#][9]
Test Mode:[*][7][5][9][#][8][1][3][5][8][0]
Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
A-key: [Menu][0][2][5][#][#]
External Audio: [Menu][0][#][#][#][#]
Debug Menu: [Menu][8][0][4][1][5]
Brief NAM Programing: [Menu][4][0][6][2][6] (not all version)
LCD Contrast: [Menu][4][5] (not all version)
SIO Mode: [Menu][4][9]
SIO Mode: [Menu][6][9]


SK Teletech


SKY-IM 1000, 1400, 2000, 2200, 2400 Code for NAM Programming Mode :
NAM Set : [#][7][5][8][3][5][3][8][3][2][4][#][6][2][6][#]
Test Mode : [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]


SKY-IM 7100, 7200, 7300, 8300, 8500 Code for NAM Programming Mode :
Nam Set:[*][7][5][9][#][3][6][4][*][7][3][8][8][4][6][4][#]
Min Simple Mode [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]
Test Menu [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]
Enter A-Key [#][7][5][8][3][5][3][2][6][6][#][2][5][3][9][#]
Voice Memo [#][8][7][6][7][#][2][7][7][#]
IRM Simple Mode [#][7][5][8][3][5][3][2][6][6][#][4][7][6][#]
Change Data [#][7][5][8][3][5][3][8][3][2][4][#][7][5][2][3][#][8][3][7][8][#]



Synertek

Synertek S200 Code for NAM Programming Mode :
A-KEY [2539**][SAVE]
Test mode [MENU][0][ Field Service Code ]
Debug screen [##33][SAVE]
Debug screen [##523][SAVE]
RF Test [####][SAVE]
LCD type change [##325][SAVE]

Synertek S500 Code for NAM Programming Mode :
SAR Test Strife test[*][#][0][0][0][0][#]
Debug screen[*][#][8][3][7][8][#]
Clear LCD[*][#][8][4][8][3][7][8][#]
Debug menu, R UIM Enable[*][#][4][4][3][3][3][6][#]
CDG , Service option[*][#][2][3][4][#]
Function Test, LCD Contrast[*][#][8][7][8][#]



Sanyo

Sanyo SCP 5300 Code for NAM Programming Mode:
Nam Set : [#][#][ SPC CODE ][ OK ][ KEY DOWN ][ OK ]
SET A-Key[#][#][2][5][3][9][ OK ][ KEY DOWN ][ OK ]
View Version [#][#][*][*][8][3][7][ OK ][ KEY DOWN ][ OK ]
Debug Mode:
[ FSC CODE ]=040793
Debug Menu[#][#][ FSC CODE ][OK][KEY DOWN][OK]
VIEW/CHANGE CAI [#][#][7][7][3][8][OK][KEY DOWN][OK]
Set Vocoder [#][#][8][6][2][6][3][3][7][OK][KEY DOWN][OK]
Reverse Logistic [#][#][7][8][6][OK][KEY DOWN][OK]
Set IP Adress [#][#][2][7][6][9][7][3][7[OK][KEY DOWN][OK]
Accessibility (TTY ON/OFF)[#][#][8][8][9][OK][KEY DOWN][OK]
Advanced Data [#][#][3][2][8][2][OK][KEY DOWN][OK][MSL CODE]
Ready Link [#][#][4][6][3][6][OK][KEY DOWN][OK]
Browser init (ON/OFF)[#][#][4][6][8][2][OK][KEY DOWN][OK]
Picture Token [#][#][2][5][3][2][7][OK][KEY DOWN][OK]



Ubiquam

Ubiquam U 100 Code for NAM Programming Mode :
BREW setup menu : [#][#][2][7][3][9][*][#][7][3][8][*][PWR]


Withus

Withus wce-100, 200, 300, NAM Programming:
Nam Set: [#][#][9][4][8][4][8][7][Save]
Nam Set: [#][#][9][4][8][4][8][2][Save]
WCE-200 ESN write: [#][#][6][6][8][3][5][Save]

Repair please wait on NEC N2xx

*#3727372#

To reset LG3g Back to factory setting use:
2945#*#

You can format Nokia wd2 with this code too.
I have Tested it and 100% working

*#7370#

CODES

Alcatel
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

Bosch
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
SIMcard serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #

Ericsson 6xx/7xx/8xx
IMEI number: * # 0 6 #
Software version: > * < < * < *
Default language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Ericsson A1018S/T10S/T18S/T28S
IMEI number: * # 0 6 #
Software version: > * < < * < *
Default language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN
press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Hagenuk (Duet)
IMEI number: * # 0 6 #
Software version check: # # 9 1 4 0 * 8 3 # 7 5 * 2 #
Motorola
IMEI number: * # 0 6 #
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK] * - press this until box shown up

Maxon
*#9988# Tetris Play
*#9900# Software Version
*#9911# L1 Debug on/off
*#9916# Text (scroll trough with up/down)
*#9937# Discharging battery
*#9958# Watch stop
*#9959# Watch start
*#9960# Contrast set
Lock status *#9917#

BERSAMBUNG..............
Sony
IMEI number: * # 0 6 #
Software version: * # 8 3 7 7 4 6 6 #
Show list of product creator names (you must save this number in your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1
Alcatel 501 Codez
Init codes:
###847# Reset to factory defaults (danger...)
###337*07# Phone restart

Language selectors:
*#0000# Automatic
*#00xx# xx= 07,27,41,44,61,63,64,84,91,92,94 English
xx= 43,49 Deutsch
xx= 48 Polski
*#0420# Czech
*#0421# Slovak

** unlock

-Master code :

Alcatel HD1, HE1 : 25228353
Alcatel BE1, BE3 : 25228352
Alcatel BE4, BE5 : 83227423


-Lock/Unlock codes:
(ask your Provider for network codes... )
###765*02# Add
###765*78# Deactivate
###765*05# ?
###765*07# Erase
###765*08# Unlock

FOR Benq m300
*#300# send = sw ver...
*#301# send = manual test


Sony CMD Z1 Secret Codes

IMEI Nummer = *#06#

Softwareversion = *#8377466#

Sony CMD Z5 Secret Codes

IMEI Nummer = *#06#

Softwareversion = *#7353273#

Simlock Status = *#7465625#

Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #

Siemens C25/S25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bunus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone, Menu 5 6

Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!): * 2 7 6 7 * 3 8 5 5#
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #

NOKIA 5110/5120/5130/5190/6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI

Nokia 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #

Sony
IMEI number: * # 0 6 #
Software version: * # 8 3 7 7 4 6 6 #
Show list of product creator names (you must save this number in your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1


G50 **00012*00000000# or **00032*00000000#


Wallet Reset code for Nokia 60 series is *#7370925538#
IMEI *#06#

Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock

Turn ON the phone and type: *#9917#

To enter Unlock Code in TSM100?
Type: ****987 + Call

To Enter Unlock Code in TSM100v/TSM30?
Type: ##**9987 + Call

BERSAMBUNG..................
Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #

Siemens C25/S25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bunus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone, Menu 5 6

NOKIA 5110/5120/5130/5190/6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI

Nokia 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #

Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!): * 2 7 6 7 * 3 8 5 5#
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #
Sharp TM150 :

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER1#) --- Firmware Version
-----------------------------------------------------------------

sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off


Sharp GX-10 unlock solution

With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked

Sarp Gx15/20/30 Tm100

Phone is on test mode
you can see **** on phone display
For finishing unlock folow the next steps :
Press 1 on phone keypad
Press 99
Press right top key
Press 3 FOR UNLOCK
or Press 1 FOR FACTORY DEFAULT
Press roight top key
Wait to see on display format ok
Press right top key 3 times or more until phone is off

E710/715
*#32436837# DAI ON Digital Audio Interference On
*#3243948# DAI OFF Digital Audio Interference Off
*#9324# MONITOR
*#0746# SSMS MEMORY:20
*#0842# vibra on
*#0289# buzzer on
*#4357# HELP (4357) This screen!!!!!!!
*#7777# verze SW
*#8888# verze HW
*#9999# Revize HW
*#0782# cas provozu, zapnití a vypnití - LIVE TIMER
*#0523# 41 (80) menu: 12
*#0638# SIM: f23003 F230 030
*#0778# SST size: 10
*#9273696# Java D/L setting
*#92782# Wap user agent
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm - YAMAHA OK
*#0778# Sim Service table
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)


E700/S500 100%..... X100/X600???!!!???

#*566335# Wap model ID
#*5663352# java model
#*5663351# model
#*53696# java download mode
#*536963# serial enabl others disabled
#*536962# HTTP enabl WAPSAR disabled
#*536961# WAPSAR enabl HTTP dis
*663867 MF file dumped
*335 All MMS mes deled
*2767*77667# Spain MMS settings
*2767*78667# Portugal
*2767*65667# Netherland
*2767*29667# Czech
*2767*28667# Austria
*2767*48667# Italy
*2767*37667# France
*2767*85667# Uk
*2767*33667# Germany

*2767*73738927# MMS Reset????


*2767*77927# Spain WAP Setting are applied
*2767*78927# Portugal
*2767*29927# Czech
*2767*65927# Netherlands
*2767*28927# Austria
*2767*37927# France
*2767*48927# Italy
*2767*85927# Uk
*2767*33927# Germany

#7263867# Ram Dump On

#*3232# Current Mode - DCD mode
#*3231# DCD en TRACE dis
#*3230# TRACE en DCD dis

#*7247# ??????
#*3683# ??????
#*3777# ??????
#*3779# ??????
#*8645# ??????

#*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt

*#7465625# Stav zámku

#7465625*28746# Aktivní zámek deaktivován
*7465625*28746# Automatický zámek perzonalizován
#7465625*2827# Zámek Auto CP deaktivován
*7465625*2827# Zámek síte se musí aktivovat
#7465625*2877# Zámek Auto SP deaktivován
*7465625*2877# Zámek síte se musí aktivovat
#7465625*28782# Automatický zámek podskupiny deaktivován
*7465625*28782# Zámek síte se musí aktivovat
#7465625*28638# Automatický zámek síte deaktivován
*7465625*28638# Automatický zámek síte perzonalizován

#7465625*228# Aktivní zámek deaktivován
*7465625*228# Aktivní zámek perzonalizován

#7465625*746* ???????
*7465625*746* ???????
#7465625*27* ???????
*7465625*27* ???????
#7465625*77* ???????
*7465625*77* ???????
#7465625*782* ???????
*7465625*782* ???????
#7465625*638* ???????
*7465625*638* ???????

*#8377466# SW + HW info

*#8888# HW info
*#9999# SW info
*#8999*8376263# komplet info

*#8999*636# IPD info

#*2677# ARM state: None
#*0000# ??????

*#8999*324# Net monitor??

#*6200#
#*6700#
#*6900#
#*7200# neplatná úroven prístupu
#*6100# command #*6100# Executed

*2767*3700# SGH-E700 BSI
*2767*7100# SGH-S100
*2767*8200# SGH-V200
*2767*7300# SGH-S300

#0111*codigo#

*2767*637#
*2767*688#
*2767*wap#
*2767*media#
*2767*mms#
*2767*226372# Camera Reset
*2767*688# MEP off
*2767*927# WAP
*2767*2878# E2P Custom reset
*2767*3855# E2P Full reset
*2767*2878# Sec reset

#*7828# C??? Midi Ri51
#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff

#*2562# nejakej reset
#*2565# no blocking General Defense
#*3353# General defense Code Erased

#*3837# reset ???????
#*3849# reset ???????
#*3851# reset ???????
#*3876# reset ???????
#*7337# reset ???????
#*5376# reset All SMS Deleted

#*7222# Operation Typ: Class C GSM
#*7224# Error!!!!
#*7252# Operation Typ: Class B GSM
#*7271# multi Slot Class 1 GPRS
#*7274# multi Slot Class 4 GPRS

#*2787# CRTP on - Batery options
#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
#*3825# Command #*3825# Executed
#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
#*7288# GPRS Detached
#*7287# GPRS Detached
#*7666# SrCell data RAC 255 NMO 255
#*7693# Sleep Deact
#*7284# Class B
#*2256# Calibr - info
#*2286# DATAbattery
#*2527# GPRS switching set to class 4
#*2679# Copycat feat. Activated
#*3940# External looptest 9600bps not avalible in SYSOL2!
#*4263# handsfree mode Activated
#*4700# Half rate deact
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt
#*8462# Sleeptime sinc SwitchOf
#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
#*3370# EFR Deact
#*3941# External looptest 115200bps not avalible in SYSOL2!
#*5176 L1 Sleep TOI N:5 TOI P:0
#*7462# SIM phase 3
#*7983# Voltage/Freg Deact
#*7986# Voltage Activated
#*8466# Old time
#*2255# Call failed mode: Command not Implemented

#*2285 nic
#*46539 nic
#*5143 nic
#*7629 nic
#*7646 nic
#*7665 nic
#*7633 nic
#*7626 nic
#*5174 nic
#*5175 nic
#*5177 nic
#*5156 nic
#*2282 nic
#*5132 nic
#*7276 nic
#*2355 nic
#*3333 nic
#*3377 nic

#*5187# L1C2G trace Activated
#*6837# Official SW version: 120107A1
#*7524# KCGPRS: +data
#*7562# LOCI GPRS: +data
#*7638# RLC allwazs open ended TBF Actiated
#*7632# Sleep mode Debug: +data
#*7673# Sleep mode RESET
#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
#*2474# For Cmd set DEBUGBATTERY in cihard.opt
#*2834# Audio Pth Mobile Normal
#*3270# DCS support Deact
#*3282# Data Deact
#*3476# EGSM Deact
#*3676# falh volume formated
#*4674# IMSI: +data
#*4760# GSM Activated
#*4864 pro tento model nic
#*5171 data
#*5172 data
#*5173 data
#*7326# Accessorz: vibrator
#*7676# Command #*7676# Executed
#*7683# Sleep variable
#*7762# SMS Bearer CS Activated
#*7957# Command #*7957# Executed
#*8465# Time in L1 +data
#*9278# Command #*9278# Executed
#*9795# WTLS key Reset
#*2252# Current call: +data
#*2836# AVDDSS Managment Deact.
#*3877# Dump of SPY trace: +data
#*7728# RSAV done

BERSAMBUNG...........
SAGEM 612,615,715,725,730

Secret menu MENU 5 1 1 #

PHILIPS DIGA *#06# IMEI
*#3333*# Blocking list
*#2558*# All time connected
*#3377*# IMEI,FLAGS,SIM LOCK
*#7489*# Security code ???
*#3353*# clear Blocking List


PHILIPS FIZZ *#06# IMEI
*#8377*# Software version
*#1234*# Security code
*#5644*# Service code


PHILIPS SPARK *#06# IMEI
*#2254*# Status register
*#2255*# Some kind of monitor mode during dialing.
*#2558*# Time connected to net.
*#2562*# ??? number of reconnections
*#2565*# Warm restart
*#3333*# BLOCKINGLIST
*#2377*# ???BERR Phone waits random time and reconnects to network.
*#3377*# Information, SIM-lock
*#7378*# SIM info
*#7489*# SECURITY CODE
*#7693*# Sleep mode
*#7948*# Turn off phone
*#8463*# Information on sleep mode


PHILIPS GENIE *#06# IMEI
*#2254*# STATUS REGISTER
*#2255*# Some kind of monitor mode during dialing.
*#2377*# ???BERR reconnect?
*#2355*# Near Cell Mode. U can see parameters of three nearest cells
*#2558*# Time connected
*#2562*# number of reconnections
*#2565*# Warm restart
*#2772*# Base Station Paging Multiframe.
*#2847*# HIDDEN MENU!: 5.5:Closed User Groups
*#3333*# BLOCKING - list
*#3353*# clears Blocking list
*#3377*# SIM LCK
*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0
*#4377*# ??? battery charging ???
*#7378*# SIM phase
*#7489*# Security code
*#7693*# SLEEP-mode
*#7948*# Turn off

- GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369# and go to menu ¡°SW Version¡±
- GD67/GD87/X60/X66/X100/X200/X400/X500: with SIM press *#9999# while phone searching for network
- X200 : with SIM press #02# while phone searching for network

- X6X : Power on the phone with valid sim card and tape this code : 52824**
then tape 746, Menu, Menu then enter your code

Nokia 3110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000# bzw. *#9999# bzw. *#3110#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Werkseinstellungen *#7780#

Simlock info *#92702689#



Nokia 3210 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons


Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data


EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#



Nokia 5110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4

Nokia 5120 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4

Nokia 5130 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4

Nokia 5190 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+ 1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4

Nokia 6110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#

Nokia 6130 Secret Codes

IMEI Nummer *#06#
Software Version *#9999#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92772689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
6. Seite insgesamte bisherige Telefonzeit (min)

EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#

Nokia 6150 Secret Codes

IMEI Nummer *#06#
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#

Nokia 7110 Secret Codes

IMEI Nummer *#06#

Servicemenü *#92702689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

Nokia 8110 Secret Codes

IMEI Nummer *#06#

Software Version *#8110#

1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data

Testmodus aktivieren *#746025625#

Nokia 8148 Secret Codes

IMEI Nummer *#06#
Tastensperre MENÜ + *
Lautlos MENÜ + #

BERAMBUNG.................

for NEC
IMEI *#06#

Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock

pass is 8 digits

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock



code for repair n21 n22 n223
*#3727372#

FOR MITSUBISHI
and hold C, enter 999, release C *#06# View IMEI
*#0044# English
*#0049# Deutsch
hold * 4329 Net Monitor1
hold * 621342 Net Monitor2
hold * 5472 M4 Testmode
hold * 5806 SW version
hold * 5807 HW version
hold * 936505 SW and HW version


hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level


Firmware Press and hold C, enter 597, release C
secret menu Press and hold C, enter 987, release C.Press OK
debug mode Press and hold C, enter 397, release C
phase-2 mode Press and hold C, enter 499, release C
Turn off phone Press

for MAXON
*#9917#
#9917*network code#
#9917*part IMSI#
#9917*simlock SLPUK#
#9917*IMSI#

SG1000 Master Code Unlock 24681357
SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)
this code is for enter in serviçe menu *#*#1705#

FOR LG
secret code for U8130 & U8138
47328545454#
-------------------------------
To see version on LG 81X0
277634#*#
To enter unlock code :
2945#*88110#

IMEI (ALL): * # 06 #
IMEI and SW (LG 510): * # 07 #
software version (LG B1200 ): * 8375 #
recount cheksum (LG B1200 ): * 6861 #
factory test (B1200): #PWR 668
unknow (LG 500 ): 8060#*
unknow(LG 200 ) *789# + send
unknow (LG 500 ): 9270#* and 9278#*
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600 ): 2947#*
lg 5300 :2945#*5301#

Siemens st55, st60 & Nec e101 reset phone:
*01763*737381#

master code for siemens SX1 punch these code
*#0003*66206168#
Sharp TM150 :

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER1#) --- Firmware Version
-----------------------------------------------------------------

sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off


Sharp GX-10 unlock solution

With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked


Contract (NCK): #9917*66607611
Prepaid (SPCK): #9917*74255444



Motorola p2k Flash mode press
*+#+Power

AMC450 Nam Programming:
Nam Set: *74269#*748#96148063+SEL

[AUDIOVOX]
------------------------------------------------------------------------
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc Nam programming:
Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox CMP-3 Nam Programming:
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950 Nam Programming:
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032) Nam Programming:
Thera Nam Programming User Manual - nam_thera.pdf
AUDIOVOX TEST MODE:
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.

[EPSILON-COMPAL]
Epsilon vc-5x Nam Programming:
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##


Ericsson A1228c, T61, etc Nam Programming:
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming:
Nam Set: 923885, Joystick to the right, 111111

Gtran gcp-2000 Nam Programming:
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming:
Debug Mode: 01#727+Spc
Test Mode: 01#765


Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)



Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#



Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok


lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto



Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284



Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)


Motorola t182, c210, etc Nam Programming:

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#


Motorola StarTac 2004 Nam Programming:

Nam Set: 5759789*#, rec key (3)times (spc - 915037)

Motorola ms200, ms230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)

Motorola v6060 Nam Programming:

Nam Set:147*369#456*0#

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.

3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

PANASONIC TEST MODE:

Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says "NAM 1" and choose OK. Scroll down
to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
"Back To Level 1" choose YES. Now choose EXIT the phone will ask you
"Exit And Save Change" choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the "Built-In-Monitor"

1 komentar:

  1. aduh pak,tolong dong..hp q audiovox6700,truz kekunci,password nya lupa,gimana ya?klw di restart gmn?kode untuk restart apa?tanks ya..tlg dibantu

    BalasHapus

Diberdayakan oleh Blogger.

Popular Posts

Label 2

SELECT LANGUAGE :